1. Steel Frame The frame is made of 2mm welded heavy-duty galvanized steel. It prvides the frame with high rigidity & durabiity.

2. New Sweep Seals Four-finger sweep seals are installed at panel's top and bottom, which increase the contact point by 50%, when comparing to the past products series. It provides optimum seal contact to keep out sound effectively.

3. Improved Trim System Trimmed and trimless designs provide options for reinforced and replaceable face panels, catering different design proposals.

4. Newly Invented Bullnose The single design bullnose replaces the traditional male and female-sided bullnose. Equipped with vertical compressive seals, it improves the depth of interlocking, and prevents sound leaks effectively.

1. Standart clearance top 25mm and bottom 38mm mechanical seals, together with four-finger multiple contact sweep seals, keep out sound effectively.

2. Gypsum or galvanized steel faces as standart face finishes. Single seamless panel with a maximum height of 13m. Panels can be lengthened up to 18,3m through splicing.

3. Waist-high seal activator for easy operation.

4. "Quick set" top and bottom mechanical seals provide the most reliable and fastest operation.

5. Acoustic performance achieves STC 56 on ASTM Complete Operable System Test Report.

6. Patented overall design and features, with accredited international certifications for rigorous acoustics and seismic performance standarts.

Panel Construction

• Panels are nominal 100 mm in thickness and up to 1219mm in width.
• 2mm welded, heavy-duty, galvanized steel frame supplied with integral factory applied aluminum vertical edge and face protection.
• Acoustical faces are available on each side of panel.
• Frames are adaptable to paired panel or continuosly hinged panel operations with recessed hinges protruding no more than 25mm and 6mm from face respectively.

Seal System

• Vertical sound seals are of "tongue and groove" configuration to ensure panel-to-panel alignment and prevent sound leaks between panels.
• Top and bottom horizontal seals can be operated simultaneously by a removable handle with a single crank action not requiring more than one turn on the spindle shaft,

Finishes

• Unfinished panels are available to accomodate field-applied finishing.
• Standart face finish can be gypsum board, steel face, carpet fabric, wood veneer and other custom finishes are also available from the manufacture's standart list of finishes.

Suspension System

• Track consits of clear anodized architectural-grade aluminum alloy 6063-T6.
• Track intersections made from the same architectural-grade extruded aluminum similar to the regular track without variation in texture and color.
• Track carries are made with precision ground steel ball bearing wheels encased in molded polymer or precision steel tires to protect the running aluminum track surface.

Partition System

• The lead panel has the option of being into an acoustical wall jamb or complete with balloon vinyl seal without the need of a wall jamb.
• Single or doble inset pass door of the same panel thickness are also available without the need for protruding door hardwares. 

Acoustics

• The partition system has been tested by a recognized independent acoustical laboratory to either ISO 140-3 or ASTM E90 standart for sound ratings.

A high quality track system ensures that Hufcor partitions will operate smoothly for years to come and assist in the quick set-up and storage of panels. All Hufcor tracks have been rigorously tested for a minimum of 100 miles (161 km), approx. 14 years of usage cycle time. Job requirements vary, which is why Hucor offers a wide selsction of tracks to meet your operating requirements.

1. Aluminum Track Systems.

2. Steel Track Systems.

1. Omni-Directional Panels

Omni-directional panles provide the ultimate flexibility to your operations because each individual panel can easily turn around corners and move to alternate locations or remote storage. Therefore, many different storage layouts can be created to fit your floor design and layout.

2. Paired Panels

When remote storage is not required, the center-hung panels hinged in groups of two or three, are the ideal solution for quicker and easier set up, than omni-directional panels. Optional hinging is available to accommodate moldings or other decorations. Acoustical ratings are the same as omni-directional Panels.

3. Continuosly Hinged Panels

Continuosly hinged panels are hinged together and move from wall to wall in a straight line. Electrically operated for fast, easy set-up.

Pass Door Features.

Hufcor's pass door has been designed to provide optimal in-field performance. Features included:

• Rigid steel truss frame for durability.
• Protective edge trim for durability and visaul aesthetic.
• Perimeter compression seals.
• No exposed fasteners on inside of door frame.
• Positive latching door hardware.
• Automatic Bottom seals with downward force to stabilize door in opening.
• Door leaf compensates for floor variances with a field adjustable mechanical bottom seal.

Write us here, we will be back to you ASAP.